Best wire fishing tool information
1. Klein Tools 56331 Fish Tape, Steel Wire Puller with Double Loop Tip, Optimized Housing and Handle, 1/8-Inch x 50-Foot
- Durable 1/8-Inch wide steel fish tapes are firm yet flexible for large wire pulls
- Optimized design of the tape housing decreases payout effort; slip-resistant geometry improves winding power
- Multi-position handle gives you a firm, steady grip as you pull tape from the case
- Descending laser etched markings in 1-Foot (0.3 m) increments
- Made in the US with Global Components
- Easy-to-read distance marks allow you to more accurately measure conduit runs and the amount of tape left to pay out
- Polypropylene case and handle offer high impact resistance
2. KOOTANS 11 ft Fiberglass Wire Running Kit Wall Cable Wire Fishing Rod Pull Push Tool Electrical Fish Tape Set with 6 Different Accessories
- FUNCTION — Fiberglass fish tape cable rods kit apply to cable, wires, HDMI and network lines, other home wiring installation. It’s great for running wire through walls, attics, conduits, crawl spaces, sub-floors, ceilings and car trim, etc.
- MATERIAL — Fiberglass, it’s better than plated carbon steel. This fish tape has strong flexibility, rigidity and great insulation, but do not bend too much, otherwise it will break(Cannot be used on a 90 degree bend of small pipe). Low friction design allows the fish tape rod to easily glide through the conduit without stopping at turns, joints or couplings.
- SIZE — Single rod length: 1.1FT/0.33M, Diameter: 0.16inch/4mm (can work in narrow areas). Rods can be used individually or screwed together for required length, can be extended up to 11 feet, and together with 6 accessories, can be used in differing situations for pulling wire, snagging wire, etc.
- HIGH VISIBILITY — Electrical fish tape rods are colored with a bright yellow to be able to locate and differentiate the rods from wires easily. Also it is wear-resistant, corrosion-resistant and anti-oxidation, longer lifespan.
- CONVENIENT STORAGE — 10pieces 1.1FT fiberglass rods and 6 different accessories in one transparent plastic tube case with yellow silicone rubber end caps. It can be hung and no need to worry about end cap damage. A great handy kit to keep everything tidy and tucked away without taking up much space.
3. Glarks Up To 2.2mm Wire Rope Crimping Tool Wire Rope Swager Crimper Fishing Crimping Tool With 180Pcs 1.2/1.5/2mm Aluminum Double Barrel Ferrule Crimping Loop Sleeve Kit
- ♛【What You Get】: In this crimping tool set, it include a heavy duty fishing crimping pliers and 3 size 180pcs double barrel ferrule crimp sleeve set, they are well packed in a paper box.
- ♛【Durable Quality】: Made of high quality carbon steel, with black oxidation treatment on the surface form a dense layer of oxide film, you won’t worry about corrosion and rust. rubberized non-slip handles for comfort.
- ♛【Crimping and Cutting】: It include 4 crimping positions 0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm; Fishing pliers Jaws come with two side cutters to cut steel cable precisely; 150Pcs crimp sleeve is 1.2mm, 1.5mm, 2mm.
- ♛【Product Feature】: Crimping tool with self locking mechanism design makes it more relax to provide optimum pressure, and the safety lock is easy way to keep you crimper close.
- ♛【Application】: Fishing crimping tool is made from high quality, come with 3 size crimp sleeve, can be widely used for wire rope, cable line dog leashes etc.
4. Boeray 11′ Fiberglass Running Electrical Wire Cable Pulling Fish Tape Kit with 5 Different Attachments and Fish Tape Tool in a Carrying Case
- Material: Fiberglass. Fiberglass better than Plated Carbon Steel, this fish tape will not break when folded, faster, easier pulls: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings;
- Size: Length:1.1FT (33cm)/pcs, Diameter: 0.16″ (4mm), can be extended up to 11FT and combined with second kit
- Multifunctional:Tool comes with Includes Fiberglass Rod, Plus 10in Chain Noodle, connection, Hooks, and Carrying Case.Can be combined with additional kits,very convenient;
- Fish Tape Fastener:Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly;
- Use for your interior and exterior Electrical Site Wiring like, Outlet, Plug, Socket, light fixture, Ceiling Fan, Dimmer, Switch, short runs installing electrical box, Electrical Panel, Subwoofer Box, Switch Box, Junction Box, CPU, Breaker Box, Receptacle box, Transformer, Doorbell, Intercom, Surveillance Camera, DCC, Security systems, Smoke detector, Thermostat, Appliances, Hot Tub, Telephone/Internet Line or Cable TV Coax;
- 1.11’fiberglass running wire cable electrical fish tape kit is made of fiberglass material, includes 10PCS rods (1.1ft length) with threaded brass connectors, Magnetic connector,3/16″ acrylic connection, brass push and pull rods.
- 2.Use for running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, Great for installing cable,wires,HDMI and so on .
- 3.This fish tape kit is flexibility(don’t over force), rigidity and great insulation, wear-resistant,corrosion-resistant and oxidation resistance,The extension rods can be connected together to achieve the required length, extending up to 11 feet.
- 4.The bright green fish tape helps u locate and differentiate the rods from wires easily.
- 5.The pacakge comes with a plastic storage case ,its convenient to store.
- Hardened Steel / Black Oxidation Jaws: IWISS Fishing Crimping Tool used high-quality carbon steel to support the jaws hardness.After black oxidation treatment on the surface form a dense layer of oxide film so you do not have to worry about it will be preserved by sea water corrosion or occasional inappropriate and rust
- 4 Crimping Positions and 2 Hardened Side Cutters:The 4 crimping positions include:0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm.It can easy crimp copper / aluminum sleeve and more from 50-450 lb test line
- 2 Hardened Side Cutters and Loaded Spring Handle: The 2 hardened steel side cutters work with the spring which loaded handle.It help you cut the wire / monofilament without frays and the strong spring open the cutters instead by your hands
- Cushioned non-slip grips and Feature a Safety lock: The stainless grips wrapped with the non-slip cushioned and comes with a safety lanyard.The safety lock is easy way to keep you crimper close
- Better Quality:Hassle-free money back for non-artificial damage. IWISS Fishing promises 100% satisfaction to our every customers
7. Crimping Tool, Wire Rope Crimping Tool, Up To 2.2mm Swager Crimper Fishing Wire Crimping Tool with 100 PCS Aluminum Double Barrel Ferrule Crimping Loop Sleeves Kit with Cutting Function for Cable
- 𝗣𝗿𝗲𝗺𝗶𝘂𝗺 𝗤𝘂𝗮𝗹𝗶𝘁𝘆 – The wire crimping tool was made of heavy-duty stainless steel, which is corrosion and rust resistance. 4 positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm, It can easily crimp copper/aluminum sleeve and more from 50-450 lb test line.
- 𝗦𝗽𝗲𝗰𝗶𝗮𝗹-𝗣𝘂𝗿𝗽𝗼𝘀𝗲 – Cable crimper tool With non-slip grips and self-locking. The safety lock is an easy way to keep your crimper closed when you don’t use it. And the mechanism design makes it more relaxing to provide optimum pressure.
- 𝗪𝗶𝗱𝗲 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻 – Crimping tool kit comes with 2 hardened steel side cutters, which can help you cut the wire without frays and the strong spring opens the cutters instead by your hands. Coordinate with aluminum double-barrel ferrule crimping loop sleeve can be widely used for wire rope.
- 𝗣𝗮𝗰𝗸𝗮𝗴𝗲 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱 – High precision wire rope crimping tool with a 100Pcs Aluminum double-barrel ferrule crimping loop sleeve kit.
- 𝗣𝗮𝘆 𝗔𝘁𝘁𝗲𝗻𝘁𝗶𝗼𝗻 𝘁𝗼 – ❶ The crimping tool can only be crimped to aluminum sleeves of 3/32″ and below. ❷ The cutting section can only cut wire ropes 1/16″ and below.
9. Magnetic Wire Pulling System – Wire Routing Magnet Tool Kit – Wall Electrical Cable Navigation System
- Small design of leader allows unit to fit into small openings. Secure connecting eyelet prevents wires or cables detaching from leader. Electrical wire pulling kit with heavy duty nylon string helps easily navigate through narrow spaces
- Easy to use for any DIY project, no professional training required. Hard-case provided for storage
- Route electrical wires & cables in enclosed areas with ease, works underwater as well
- Kit contains hard-case, 25 ft heavy duty nylon string w/ spool, 1 scout & bait magnet, 1 eyelet leader
10. Fish Tape, Electrical Wire Puller, Wire Fishing Tools with Double Loop Tip, Flexible Steel Fish Tape, Durable Housing 1/8 x 100 Foot by RamPro
- Firm but flexible steel fish tape is handy for pulling large wires. It is otherwise difficult to do.
- This wire fishing tool will last a long time. It is hard and can withstand a lot of abuse from daily use.
- Get a Grip! Improved Comfort Grip Handle and built-in Thumb Lock on our 1/8” x 100-foot fish tape makes pulling electrical or communication wires easy without getting tangled up!
- Headache-Free Interior & Exterior wire snake for running wire through Ceilings, Walls/Drywall, Conduit, Insulation, etc…
- A Must-Have wire puller For Electricians, Contractors, and DIYs! Don’t work without it!