Best vhf marine antenna information
- Equipment for anglers of all ages and experience
- Made to be reliable and durable
- Tested to be easy to use and high quality
- Bandwidth-5 MHz within 2.0:1 VSWR
- Brass and copper elements
- Chrome-plated brass ferrule with standard 1 inch to 14 thread
- Includes 15′ RG-58 cable and a PL-259 connector
- Suggested mount styles 4187, 4188-S, or 4190 ratchet mounts
2. HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259
- Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power;
- W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259;
- VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting.
- Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting.
- The antenna does not come with mast pole mount; it comes with TWO U-bolt which can be used with the attached plate for pole mounting.
- Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use.
- HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range.
4. HYS VHF Marine Antenna Waterproof 3DBI 43.3inch Fiberglass Antennas W/22.9ft(7m) RG58 Low Loss Premium Coaxial Cable with PL259/ Built-in to Nylon Ratchet Mount
- FrequencyRange: 156-163MHz; Band width:5MHz; Within2.0:1 VSWR; Impedance:50Ω;
- VSWR: Nominally 1.5:1 at 159.5 MHz ; Gain: 3.0dBi; Polarization:Vertical;
- Horizontal Beam Width: 360º; Vertical Beam Width: 58º; DC Ground: NoDCGround;
- 43.3inch Fiberglass Antenns; Nylon Box Dimensions: 4.7″(12cm)H x 2.6″(6.8cm)W x 3.7″(9.5cm)L;
- VHF fiberglass Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting.
5. ZOMCHAIN Marine VHF Antenna Mounts, Ratchet Mount, 316 Stainless Steel Adjustable Base Mount for Boat
- ✔ Size: Base measures 3 9/16″ x 2 1/2″ , 0.87″ – 10 thread male, 3/8″ hole for cable pass through, Hole diameter 5/16″
- ✔ 316 Stainless steel: Marine grade 316 stainless steel, rust-proof, Excellent seawater corrosion-resistant and durable. Highly polished to a beautiful mirror-like finish
- ✔ Packaging: There are two kinds of screw fittings for your choice, one is the bolt, the other is the screw (All accessories are made of 316 stainless steel)
- ✔ Anti-Corrosion Materials: Marine Antenna Mount made of precision cast 316 marine grade stainless steel
- ✔ Exquisite design：The antenna pedestal has two adjustable ratchets. The upper ratchet has an adjustable angle of 270 degrees and the lower ratchet has an adjustable angle of 180 degrees
6. UAYESOK VHF Marine Antenna 159V Stubby Boat Antenna PL259 Connector W/16.4ft RG-58 coaxial Cable,L-Mount Bracket
- [159V Stubby Marine Antenna]Frequency: 156-163MHz; Impedance: 50 Ohm; VSWR: less than 1.8; Gain: 2dBi(neglect the cable length); Maximum Power Input-watts: 50W
- [MECHANICAL SPECIFICATIONS]Height: 164±5 mm; Termination: PL259; Cable Length/Type: 5m/16.4ft/Low loss RG-58 coaxial cable
- Stainless steel L-bracket for side or mast mounting(horizontal rail or vertical rail)made of corrosion-resistant material,adapt to rough weather;easy install and operate.
- Pretuned for all marine band frequencies,Increases reception and range of radio; Extend the Range of Your Communication.widely used in boat and offshore, motor boat, cruiser, sailboat, yacht, etc.
- Compatible With Cobra,Icom, uniden, Standard Horizon, HYS, Retevis Handheld Marine Floating VHF Radio and Marine Fixed Mount Radio; For Icom, Kenwood, Motorola, Yaesu/Vertex Standard, Uniden, Wilson, Marantz Handheld or Fixed Mount VHF RADIO.
7. Marine VHF Antenna Mounts, Adjustable Base VHF Antenna Mount for Boat, 316 Stainless Steel, Heavy Duty, Include Installation Accessories Screws
- 【Size】: Fits all standard 1-inch marine antennas. Base measures 3.62x 2.52 inch.
- 【316 Stainless Steel】:TINGZHIGO Marine VHF Antenna Mounts are made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.
- 【Dual Swiveling Ratchet Design】Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces.
- 【Easy for installation】Upper ratchet: When the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place. Lower ratchet: First, you loosen the screw in lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in lower ratchet.
- 【Packaging】: 1x Marine VHF Antenna Mount,4x Screws,4 xBolts,4x Nuts . We provide screws for you to install. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel). Before delivery, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation and fading will occur. Please feel free to buy it. If there is any problem, please contact us, and we will try our best to solve your problem.
8. Calissa Offshore Tackle Marine VHF Antenna Mount – Adjustable Base Mounts Ratchet Boat for Boats – Made with 316 Stainless Steel Mounts
- ✔️ CORROSION RESISTANT- High Quality Marine Grade 316 Stainless Steel does not rust or corrodes in salt environment
- ✔️ HEAVY DUTY CONSTRUCTION- Highly Polished mount fits all standard 1″ marine antennas
- ✔️ NO HASSLE WARRANTY- 1 year Manufacturer’s factory defect Warranty
- ✔️ PRECISE MEASUREMENT- Base measures 2 1/2″ x 3 9/16″ Mount has 3/8″ hole for cable pass through, Hole diameter 5/16″
- ✔️ 316 STAINLESS STEEL ACCESSORIES INCLUDED–1/4″ Screws, Nuts, Bolts, and Washers for deck or bulkhead mounting
9. UAYESOK VHF Marine Base Antenna 48 Inch Fiberglass Waterproof Boat Antenna W/7m RG-58U Cable Adjustable Ratchet Fixed Mount
- [ELECTRICAL SPECIFICATIONS] Frequency: 156-163MHz; Impedance: 50 Ohm; VSWR: Nominally 1.5:1 at 159.5MHz; Gain: 3dBi; Maximum Power Input-watts: 50W;
- [MECHANICAL SPECIFICATIONS] Height: 110±5 CM/44inch; Termination: PL259; Cable Length/Type: 7m Low loss RG-58U coaxial cable(white); Weight: 375g
- Anti-Corrosion Materials, fiberglass construction, smooth and high gloss finish, long-life use
- 180 degrees adjustable Nylon ratchet mount, sturdy and durable, easy to Install and operate
- Pretuned for all marine band frequencies, increases reception and range of radio; widely used in boat and offshore, motor boat, cruiser, sailboat, yacht, Truck, RV, Cruise Ship,Kayaking,etc.
- Compatible With Cobra,Icom, uniden, Standard Horizon, HYS, Retevis Marine Floating VHF Radio and Marine Fixed Mount Radio; For Icom, Kenwood, Motorola, Yaesu/Vertex Standard, Uniden, Wilson, Marantz Handheld or Fixed Mount VHF ham RADIO
10. Bingfu Boat Marine VHF Radio Vehicle Ham Mobile Radio Antenna VHF UHF 136-174MHz 400-520MHz Magnetic Base PL259 Male Antenna for Garmin Uniden Cobra ICOM Standard Horizon Eclipse Marine Two Way Radio
- Frequency Range: VHF 136-174MHz, UHF 400-520MHz; Feature: Strong Magnetic Base Mount; Compatible with: Marine VHF Radio; Amateur Radio; Car Mobile Radio; Ham Radio; FRS GMRS Radio; Two Way Radio; Public Radio Scanner;
- Antenna Cable: 3m / 10 feet RG58/U Cable; Cable Connector: UHF PL259 Male Connector; Accessoried Adapter: SMA Female to UHF SO239 Female Connector Adapter; Antenna Height: 47cm; Weight: 280g; Package List: 1 x Antenna; 1 x SMA Female Connector Adapter (As the Picture Shown)
- Compatible with Marine VHF Two Way Radio: Uniden, Cobra, ICOM, Garmin, Standard Horizon Eclipse Series; Compatible with Amateur Mobile Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker;
- Compatible with Marine VHF Two-Way Radio: Uniden UM380 UM380BK UM385 UM385BK UM415 UM415BK UM435 UM435BK; Cobra MRF45D MRF57B MRF57W MRF77B MRF77W; Standard Horizon Eclipse Series GX1300 GX1400 GX1400GW GX1400GB GX1600 GX1600B GX1800 GX1800GB GX1800GW GX1800B GX1850 GX1850B GX1850GW GX2000B GX6000; ICOM M330 M330G M506 M605;
- Compatible with Amateur Mobile Radio: BTECH UV-50X2 UV-25X2; ICOM 2300H F6021 A120; Kenwood TM-D710G; Midland MXT275; Yaesu Original FTM-3100R FT-2980R FT-2980; TYT TH-9800 TH-7800; AnyTone AT-5555N AT-588UV AT-6666 AT-D578UV AT-788UV; Radioddity DB25;