Best marine vhf antenna information
- Equipment for anglers of all ages and experience
- Made to be reliable and durable
- Tested to be easy to use and high quality
- Bandwidth-5 MHz within 2.0:1 VSWR
- Brass and copper elements
- Chrome-plated brass ferrule with standard 1 inch to 14 thread
- Includes 15′ RG-58 cable and a PL-259 connector
- Suggested mount styles 4187, 4188-S, or 4190 ratchet mounts
3. HYS VHF Marine Antenna Waterproof 3DBI 43.3inch Fiberglass Antennas W/22.9ft(7m) RG58 Low Loss Premium Coaxial Cable with PL259/ Built-in to Nylon Ratchet Mount
- FrequencyRange: 156-163MHz; Band width:5MHz; Within2.0:1 VSWR; Impedance:50Ω;
- VSWR: Nominally 1.5:1 at 159.5 MHz ; Gain: 3.0dBi; Polarization:Vertical;
- Horizontal Beam Width: 360º; Vertical Beam Width: 58º; DC Ground: NoDCGround;
- 43.3inch Fiberglass Antenns; Nylon Box Dimensions: 4.7″(12cm)H x 2.6″(6.8cm)W x 3.7″(9.5cm)L;
- VHF fiberglass Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting.
4. HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259
- Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power;
- W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259;
- VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting.
- Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting.
- The antenna does not come with mast pole mount; it comes with TWO U-bolt which can be used with the attached plate for pole mounting.
- Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use.
- HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range.
5. Marine VHF Antenna Mounts, Rail Mount Adjustable Antenna Base, Ratchet Mount, for 7/8 to 1 inch (22-25.4mm) Rail, 316 Stainless Steel, with Mounting Wrench
- 【Size】: Base measures 1″ – 14 thread male (Standard). Recommended for installation on 22mm（7/8 inch ) to 25.4 mm（1 inch ） vertical, horizontal or oblique rails.
- 【316 Stainless Steel】: Constructed corrosion-resistant investment cast 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.
- 【Easy for installation】:This ratchet rail antenna base features a lever-action lay-down handle that makes lowering the antenna quick and easy. Lever action laydown handle makes lowering antenna quick and easy for passing under bridges, storage, and trailering.
- 【Packaging】: 1x Antenna Mount, 1x L shape Hex Allen Wrench, 1X Open-end Wrench. We provide wrench for you to install.
- 【Guarantee】:Before shipment, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation. Please feel free to buy it. If there is any problem, please contact us, and we will try our best to solve your problem.
6. Marine VHF Antenna Mounts, Adjustable Base VHF Antenna Mount for Boat, 316 Stainless Steel, Heavy Duty, Include Installation Accessories Screws
- 【Size】: Fits all standard 1-inch marine antennas. Base measures 3.62x 2.52 inch.
- 【316 Stainless Steel】:TINGZHIGO Marine VHF Antenna Mounts are made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.
- 【Dual Swiveling Ratchet Design】Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces.
- 【Easy for installation】Upper ratchet: When the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place. Lower ratchet: First, you loosen the screw in lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in lower ratchet.
- 【Packaging】: 1x Marine VHF Antenna Mount,4x Screws,4 xBolts,4x Nuts . We provide screws for you to install. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel). Before delivery, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation and fading will occur. Please feel free to buy it. If there is any problem, please contact us, and we will try our best to solve your problem.
7. ZOMCHAIN Marine VHF Antenna Mounts, Ratchet Mount, 316 Stainless Steel Adjustable Base Mount for Boat
- ✔ Size: Base measures 3 9/16″ x 2 1/2″ , 0.87″ – 10 thread male, 3/8″ hole for cable pass through, Hole diameter 5/16″
- ✔ 316 Stainless steel: Marine grade 316 stainless steel, rust-proof, Excellent seawater corrosion-resistant and durable. Highly polished to a beautiful mirror-like finish
- ✔ Packaging: There are two kinds of screw fittings for your choice, one is the bolt, the other is the screw (All accessories are made of 316 stainless steel)
- ✔ Anti-Corrosion Materials: Marine Antenna Mount made of precision cast 316 marine grade stainless steel
- ✔ Exquisite design：The antenna pedestal has two adjustable ratchets. The upper ratchet has an adjustable angle of 270 degrees and the lower ratchet has an adjustable angle of 180 degrees
8. UAYESOK VHF Marine Base Antenna 48 Inch Fiberglass Waterproof Boat Antenna W/7m RG-58U Cable Adjustable Ratchet Fixed Mount
- [ELECTRICAL SPECIFICATIONS] Frequency: 156-163MHz; Impedance: 50 Ohm; VSWR: Nominally 1.5:1 at 159.5MHz; Gain: 3dBi; Maximum Power Input-watts: 50W;
- [MECHANICAL SPECIFICATIONS] Height: 110±5 CM/44inch; Termination: PL259; Cable Length/Type: 7m Low loss RG-58U coaxial cable(white); Weight: 375g
- Anti-Corrosion Materials, fiberglass construction, smooth and high gloss finish, long-life use
- 180 degrees adjustable Nylon ratchet mount, sturdy and durable, easy to Install and operate
- Pretuned for all marine band frequencies, increases reception and range of radio; widely used in boat and offshore, motor boat, cruiser, sailboat, yacht, Truck, RV, Cruise Ship,Kayaking,etc.
- Compatible With Cobra,Icom, uniden, Standard Horizon, HYS, Retevis Marine Floating VHF Radio and Marine Fixed Mount Radio; For Icom, Kenwood, Motorola, Yaesu/Vertex Standard, Uniden, Wilson, Marantz Handheld or Fixed Mount VHF ham RADIO
- Fits all standard 1″ marine antennas
- Dual swiveling ratchet design
- Base measures 2 1/2″ x 3 9/16″
- Mount with 1/4″ FH fasteners
- Heavy duty construction for tough conditions
10. Calissa Offshore Tackle Marine VHF Antenna Mount – Adjustable Base Mounts Ratchet Boat for Boats – Made with 316 Stainless Steel Mounts
- ✔️ CORROSION RESISTANT- High Quality Marine Grade 316 Stainless Steel does not rust or corrodes in salt environment
- ✔️ HEAVY DUTY CONSTRUCTION- Highly Polished mount fits all standard 1″ marine antennas
- ✔️ NO HASSLE WARRANTY- 1 year Manufacturer’s factory defect Warranty
- ✔️ PRECISE MEASUREMENT- Base measures 2 1/2″ x 3 9/16″ Mount has 3/8″ hole for cable pass through, Hole diameter 5/16″
- ✔️ 316 STAINLESS STEEL ACCESSORIES INCLUDED–1/4″ Screws, Nuts, Bolts, and Washers for deck or bulkhead mounting